Configure your puriFlash^® 5.250

Optimized for your preparative purifications

Basic configuration

• Components
  •  Control unit
  •  Pump
  •  UV detector
  •  Fraction collector
  •  Solvent tank
  •  2 integrated column supports
  •  2 integrated dry load mounts
  •  Accessories box
• .
• Pump
  •  Flow rate: 250 mL/min
  •  Optimum flow rate for columns up to 80 mm internal diameter
  •  Max. pressure : 250 bar
  •  Quaternary gradient valve
  •  Air vent
  •  Wash discs
  •  Retention tank with leak detector
• .
• Injection
  •  Injection mode: liquid or solid
  •  “Load & Go“ technology: with automatic 10-way valve that allows the use of staggered dry load or loops for a more efficient injection.
  •  RFID technology: automatic detection of dry loads and injection loops
  •  2 mL and 5 mL stainless steel injection loops
  •  Retention tank with leak detector
• .
• Detection
  •  UV detector 200-400 nm
  •  “DAD“ technology
  •  Multi-wavelength and scan over a band of 200 nm (or 600 nm with the UVextended pack)
  •  Spectral visualization and confirmation of purity
  •  0.3 mm optical path cell
  •  Retention tank with leak detector
• .
• Compatibility of columns and support
  • Particle sizes: 5 µm, 10 µm, 15 µm, 25 µm, 30 µm, 50 µm
  • Format: All Flash columns are compatible
    Format: All Prep columns up to an internal diameter of 80 mm are compatible
    2 integrated column holders
    2 integrated Dry-Load holders
  • RFID technology: automatic detection of the columns during insertion
• .
• Fraction collector
  •  Content:
    – 3 racks
    – 132 tubes (18 x 150 mm)
  •  Technology:
    – Drainage system for the fraction collector
    – Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
    – RFID technology: automatic detection of the racks installed in the collector
• .
• Proposed racks
  •  Delivery includes 3 selected racks from the list below:
    – Rack for tubes:
    13 x 73 mm | 13 x 100 mm | 16 x 150 mm
    18 x 150 mm | 18 x 180 mm | 21 x 150 mm
    25 x 150 mm | 28 x 150 mm | 29.5 x 200 mm
    – Rack for Schott laboratory bottles 250 mL
    – Rack for funnels
    Position of the numbered tubes (to facilitate identification of the tubes)
• .
• Software and control unit
  •  Control via InterSoft X software
  •  Remote control
  •  Touchscreen 15″
  •  8 USB ports
  •  2 RJ45 ports
     Bluetooth/Wi-Fi key
• .
• System optimization
  •  Tubes with 1.6 mm internal diameter
  •  Optical path length detection cell: 0.3 mm / 40 μl
• .
• Safety
  •  Level detectors for solvents
  •  Retention tank for solvents on the pump, valves and detectors with leak detectors (pump, UV detector, valves and collector)
  •  Collector with drainage system
  •  “Fume Encloser“ technology (allows use of the purification system without the extractor hood)
• .
• Communication
  •  Network cable RJ45
  •  Communication cable Sub-D9 male/female
  •  Communication cable Sub-D9 female/female
     8 USB ports