Process Flash purification: puriFlash® 5.015-XL

Process Flash purification: puriFlash® 5.015-XL

Advion-Scientific-5015-XL-config-2022

Configure your
puriFlash® 5.015-XL

Optimized for your purifications on a grand scale

Routine Flash purification puriFlash XS 520 Plus interchim

Flow rate
825 mL/min

Routine Flash purification puriFlash XS 520 Plus interchim

Max. pressure
15 bar

Basic configuration

  • Components
    • Control unit
    • Pump
    • UV detector
    • Fraction collector
    • Solvent tray with drainage system
    • Integrated column holder (included in the Pack-Process)
    • Integrated Dry-Load holder (included in the Pack-Process)
    • Accessories box
  • .
  • Pump
    • Max. operational flow rate: 825 mL/min
    • Optimum flow rate for columns up to F3000 format
    • Max.operational pressure: 15 bar
    • Quaternary gradient valve
    • Washing discs
  • .
  • Injection
    • Injection mode: liquid or solid
    • RFID technology: automatic detection of the Dry-Load (included in the Pack-Process)
  • .
  • Detection
    • UV detector 200-400 nm or 200-800 nm (included in the Pack-UVextended)
    • “DAD” technology
    • Multi-wavelength and scan collection over band of 200 nm (or 600 nm with the Pack-UVextended)
    • Spectral visualization and confirmation of purity
    • Flow cell pathway: 0.3 mm / 80 µL
  • .
  • Column and holder compatibility
    • Normal phase (NP)
      Particle sizes: 15 µm, 25 μm, 30 μm, 40 μm, 50 μm
    • Reverse phase (RP)
      Particle sizes: 30 µm, 50 µm
    • Format: all Flash columns up to F1600 format & Dry-Load up to F0330 format are compatible
    • Integrated column holder (included in the Pack-Process)
    • Integrated Dry-Load holder (included in the Pack-Process)
    • RFID technology: automatic detection of the columns (included in the Pack-Process)
  • .
  • Fraction collector
    •  Content:
      – 3 racks
      – 42 test tubes (29.5 x 200 mm)
    •  Technology:
      – Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
      – RFID: automatic detection of the racks installed in the fraction collector
  • .
  • Recommended racks
    Delivery includes 3 racks to choose from the list below:
    • Rack for test tubes:
      16 x 150 mm | 18 x 150 mm | 18 x 180 mm | 21 x 150 mm
      25 x 150 mm | 28 x 150 mm | 29.5 x 200 mm
    • Rack for 250 mL Schott bottles
      Position of the numbered tubes (to facilitate identification of tubes)
  • .
  • Software & control unit
    • Control via InterSoft® X software included
      – Genius, Artificial Intelligence
      – “Flash & Go”™ technology: compatible with our smartphone app “TLC to Flash & Prep”
      – “Boost & Go”™ technology
    • Windows 10
    • Remote control
    • Touchscreen 15″
    • 8 USB ports
    • 2 RJ45 ports
    • Bluetooth/Wi-Fi key
  • .
  • System optimization
    • Tubing after pump: 2.4 mm internal diameter
    • Flow cell pathway: 0.3 mm / 80 µL
  • .
  • Safety
    • System light status
    • Solvent tray with drainage system
    • Level sensor for solvents and waste
    • Retention tray with leak detectors in the pump, UV detector & fraction collector
    • Retention tray for Dry-Load holder (included in the Pack-Process)
    • “Fume Enclosure” technology (allows the use of the purification system without a hood)
  • .
  • Communication
    • Communication cable Sub-D9 male/female (1 m) – unit control to fraction collector
    • Communication cable Sub-D9 male/female (0.5 m) – unit control to pump
    • Communication cable Sub-D9 female/female (1 m) – unit control to UV detector

Choose your options