Preparative HPLC: puriFlash® 5.125

Preparative HPLC: puriFlash® 5.125

Preparative HPLC puriFlash 5.125

puriFlash® 5.125

Optimized for your preparative purifications

Routine Flash purification puriFlash XS 520 Plus interchim
Flow rate
250 ml/min
Routine Flash purification puriFlash XS 520 Plus interchim
Max. pressure
125 bar
  • Small organic molecules 95% 95%
  • Impurity detection 90% 90%
  • Natural products 95% 95%
  • Peptides and oligonucleotides 65% 65%
  • Proteins and biopharmaceuticals 20% 20%
  • Isolation of metabolites 70% 70%
  • Trace enrichment 95% 95%

Components

  • Control unit
  • Pump
  • UV detector
  • Fraction collector
  • Solvent tank
  • 1 integrated column support
  • 1 integrated dry load mount

Pump

  • Flow rate : 250 mL/min
  • Optimum flow rate for columns up to 80 mm internal diameter
  • Max. pressure: 125 bar
  • Quaternary gradient valve
  • Air vent
  • Wash discs
  • Wash pump for water circulation to prevent crystalline deposits on the pump pistons (included in the PWD pack)
  • Solvent heater (under development)

Injection

  • Injection mode: liquid or solid
  • “Load & Go” technology: with automatic 6-way valve that allows the use of staggered dry load or a loop for a more efficient injection
  • RFID technology: automatic detection of the dry load and the injection loop
  • Stainless steel injection loop 2 mL

Detection

  • UV detector 200-400 nm
  • UV detector 200-800 nm (included in the UVextended pack)
  • “DAD” technology
  • Multi-wavelength and scan over a band of 200 nm (or 600 nm with the UVextended pack)
  • Spectral visualization and confirmation of purity
  • 0.3 mm optical path cell
  • Integrated ELSD detector (included in the iELSD pack)

Compatibility of columns and support

  • Normal phase (NP)
    Particle sizes: 5 µm, 10 µm, 15 µm, 25 µm, 30 µm, 50 µm
  • Reverse phase (RP)
    Particle sizes: 10 µm, 15 µm, 25 µm, 30 µm, 50 µm
  • .
  • Format: all Flash & prep columns up to an internal diameter of 90 mm are compatible
  • .
  • 1 integrated column support
  • RFID technology: automatic detection of the columns during insertion

Fraction collector

  • Content:
    – 3 racks
    – 132 tubes (18 x 150 mm)
  • .
  • Technology:
    – Drainage system for the fraction collector
    – Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
    – RFID technology: automatic detection of the racks installed in the collector

Proposed racks

  • Delivery includes 3 selected racks from the list below:
  •  Rack for tubes:
    13 x 73 mm | 13 x 100 mm | 16 x 150 mm
    18 x 150 mm | 21 x 150 mm | 25 x 150 mm
    28 x 150 mm | 29.5 x 200 mm
  •  Rack for Schott laboratory bottles 250 mL
  •  Rack for funnels
  • .
  • Position of the numbered tubes (to facilitate identification of the tubes)

Software and control unit

  • Controlled by InterSoftX software
  • Remote control
  • 15“ touchscreen
  • 8 USB ports
  • .
  • “Flash & Go“ technology: compatible with our smartphone app TLC to Flash & Prep

System optimization

  • Tubes with 1.6 mm internal diameter
  • Optical path length detection cell: 0.3 mm / 40 μl

Safety

  • Level detector for solvents
  • Retention tank for solvents on the pump and valves with leak detectors (pump, UV detector, valves and collector)
  • Collector with drainage system
  • “Fume Encloser” technology (allows use of the purification system without the extractor hood)

Communication

  • Network cable RJ45
  • Communication cable Sub-D9 male/female
  • Communication cable Sub-D9 female/female
  • 8 USB ports

Dimensions

Purification of peptides and oligonucleotides puriFlash 5.125P

Need more information?

Ready to configure yours?