Ultra-preparative: puriFlash® 5.400

Ultra-preparative: puriFlash® 5.400

Ultra-preparative puriFlash 5.400 chromatography
Ultra-preparative puriFlash 5.400 chromatography

Configure your puriFlash® 5.400

Optimized for your ultra-preparative purifications

Flow rate
125 ml/min

Max. pressure
400 bar

Basic configuration

  • Components
    •  Control unit
    •  Pump
    •  UV detector
    •  Fraction collector
    •  Solvent tank
    •  2 integrated column supports
    •  2 integrated dry load mounts
    •  Accessories box
  • .
  • Pump
    •  Flow rate: 125 mL/min
    •  Optimum flow rate for columns up to 60 mm internal diameter
    •  Max. pressure : 400 bar
    •  Quaternary gradient valve
    •  Air vent
    •  Wash discs
    •  Solvent heater (under development)
    •  Retention tank with leak detector
  • .
  • Injection
    •  Injection mode: liquid or solid
    •  “Load & Go“ technology: with automatic 10-way valve that allows the use of staggered dry load or loops for a more efficient injection.
    •  RFID technology: automatic detection of dry loads and injection loops
    •  Stainless steel injection loops
    •  Retention tank with leak detector
  • .
  • Detection
    •  UV detector 200-400 nm
    •  “DAD“ technology
    •  Multi-wavelength and scan over a band of 200 nm (or 600 nm with the UVextended pack)
    •  Spectral visualization and confirmation of purity
    •  1.0 mm optical path cell
    •  Retention tank with leak detector
  • .
  • Compatibility of columns and support
    •  Particle sizes: 2.6 µm, 5 µm, 10 µm, 15 µm +
    •  Format: all Flash and preparative columns up to an internal diameter of 60 mm and the analytic columns with a diameter of 4.6 mm are compatible
    •  2 integrated column supports
    •  RFID technology: automatic detection of the columns during insertion
  • .
  • Fraction collector
    •  Content:
      – 3 racks
      – 132 tubes (18 x 150 mm)
    •  Technology:
      – Drainage system for the fraction collector
      – Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
      – RFID technology: automatic detection of the racks installed in the collector
  • .
  • Proposed racks
    •  Delivery includes 3 selected racks from the list below:
      – Rack for tubes:
      13 x 73 mm | 13 x 100 mm | 16 x 150 mm
      18 x 150 mm | 21 x 150 mm | 25 x 150 mm
      28 x 150 mm | 29.5 x 200 mm
      – Rack for Schott laboratory bottles 250 mL
      – Rack for funnels
      Position of the numbered tubes (to facilitate identification of the tubes)
  • .
  • Software and control unit
    •  Control via InterSoft X software
    •  Remote control
    •  15“ touchscreen
    •  8 USB ports
    •  “Flash & Go“ technology: compatible with our smartphone app TLC to Flash & Prep
  • .
  • System optimization
    •  Tubes with 0.75 mm internal diameter
    •  Optical path length detection cell: 1.0 mm / 20 μl
  • .
  • Safety
    •  Level detectors for solvents
    •  Retention tank for solvents on the pump, valves and detectors (with leak detectors)
    •  Collector with drainage system, equipped with a leak detector
    •  “Fume Encloser“ technology (allows use of the purification system without the extractor hood)
  • .
  • Communication
    •  Network cable RJ45
    •  Communication cable Sub-D9 male/female
    •  Communication cable Sub-D9 female/female

Choose your options