Injection loops

Hit the mark:
Boost your reproducibility
and productivity by means
of an injection valve

Injection loops

Hit the mark:
Boost your reproducibility
and productivity by means
of an injection valve

You would like to achieve results with unequaled reproducibility and gain time in your lab: both these objectives can be achieved by introducing your samples via an injection loop coupled to a valve.

Ideal conditions for achieving your objectives.

When reproducibility comes face to face with productivity
Reproducing with your eyes closed and as you see fit!

A completely filled injection loop ensures that always the same amount is injected resulting in a perfect reproducibility whilst at the same time significantly increasing your productivity.

Peace of mind and no product loss.

Do you tend to be generous with injections? No problem, the injected surplus can be recovered out of the residue container.

Because every second matters, our technology will save you countless.

Thanks to the RFID chip and the automatic recognition of the loop volume by means of our InterSoft X software, you will never again have to enter this data manually before the purification process.

And what about the Flash purification? Thanks to the injection loops you will no longer lose time for dismantling the connections of the Flash column for the injection of your sample.

Ideal conditions for achieving your objectives.

When reproducibility comes face to face with productivity
Reproducing with your eyes closed and as you see fit!

A completely filled injection loop ensures that always the same amount is injected resulting in a perfect reproducibility whilst at the same time significantly increasing your productivity.

Peace of mind and no product loss.

Do you tend to be generous with injections? No problem, the injected surplus can be recovered out of the residue container.

Because every second matters, our technology will save you countless.

Thanks to the RFID chip and the automatic recognition of the loop volume by means of our InterSoft X software, you will never again have to enter this data manually before the purification process.

And what about the Flash purification? Thanks to the injection loops you will no longer lose time for dismantling the connections of the Flash column for the injection of your sample.

High-quality Stainless steel, optimum results.

Our injection loops are made from a high-quality stainless steel tube, which is cut and electrolytically polished in order to ensure perpendicular and burr-free cross-section which allows a perfectly flush connection to the valve. The loops are then cleaned with deionized, micro-filtered water vapor.

Alchemy or magic?
Guaranteed reproducibility.

In order to transmute the metal, we incorporate our expertise, our technology and surely a touch of alchemy. Without a doubt, the fusion of these four elements creates the impression of magic when you discover the new results obtained with the injection loops.
Once the astonishment is over, you will notice that the performance is constantly improved with our injection loops, thus increasing your satisfaction with every purification.

Discover our technology

During the injection, the loop empties in the opposite direction to the loading of the sample thus allowing a partial or total injection of the loop volume while limiting the dilution of the sample.

Perfect sealing and easy crimping.

To ensure perfect sealing, the loops are delivered with two connections and two ferrules that are not fixed to the tube. In only a few steps, the ferrules can quickly be fastened. To do so, the nut is merely screwed to the valve. Immediately afterwards purifications can be reproduced as desired.

There is always an injection loop that meets your needs.

Thanks to our wide product range covering volumes between 100 µL and 50 mL, there is always an injection available for your requirements.

100 µL

250 µL

500 µL

1 mL

2 mL

5 mL

10 mL

20 mL

40 mL

50 mL

Reproducibility of the injected volume

Gain in time

Selection of large volumes

Perfect perpendicular cut

High-quality stainless steel

Total or partial injection of the volume of the loop

RFID recognition of the installed injection loop by means of our InterSoft X Software

Need more information?

Lorem Curabitur at venenatis vulputate, dolor amet, sed mattis ipsum