Process Flash purification: puriFlash® 5.015-XL

Process Flash purification: puriFlash® 5.015-XL

puriFlash® 5.015-XL

Optimized for your purifications on a grand scale

Flow rate
825 ml/min

Max. pressure
15 bar

  • Small organic molecules 98% 98%
  • Impurity detection 5% 5%
  • Natural products 70% 70%
  • Peptides and oligonucleotides 55% 55%
  • Proteins and biopharmaceuticals 20% 20%
  • Isolation of metabolites 20% 20%
  • Trace enrichment 98% 98%

Components

  • Control unit
  • Pump
  • UV detector
  • Fraction collector
  • Solvent tank
  • 1 integrated column support (included in the Pack Process)
  • 1 integrated dry load mount (included in the Pack Process)

Pump

  • Flow rate: 825 ml/min
  • Optimum flow rate for columns up to 150 mm internal diameter
  • Max. pressure: 15 bar
  • Quaternary gradient valve
  • Wash discs
  • Solvent heater (under development)

Injection

  • Injection mode: liquid or solid
  • RFID technology: automatic detection of dry load (included in the Pack Process)

Detection

  • UV detector 200-400 nm
  • UV detector 200-800 nm (included in the UVextended pack)
  • “DAD” technology
  • Multi-wavelength and scan over a band of 200 nm (or 600 nm with the UVextended pack)
  • Spectral visualization and confirmation of purity
  • 0.3 mm optical path cell

Column and support compatibility

  • Normal phase(NP)
    Particle sizes: 25 µm, 30 µm, 40 µm, 50 µm
  • Reverse phase (RP)
    Particle sizes: 30 µm, 50 µm
  • .
  • Format: all Flash columns up to an internal diameter of 150 mm are compatible
  • .
  • 1 integrated column support (included in the Pack Process)
  • RFID technology: automatic detection of the columns during insertion (included in the Pack Process)

Fraction collector

  • Capacity:
    – 3 racks
    – 42 tubes (29,5 x 200 mm)
  • .
  • Technology:
    – Drainage system for the fraction collector
    – Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
    – RFID: automatic detection of the racks installed in the collector

Proposed racks

  • Delivery includes 3 selected racks from the list below:
  •  Rack for tubes:
    16 x 150 mm | 18 x 150 mm
    21 x 150 mm | 25 x 150 mm
    28 x 150 mm | 29.5 x 200 mm
  •  Rack for Schott laboratory bottles 250 ml
  •  Rack for funnels
  • .
  • Position of the numbered tubes (to facilitate identification of tubes)

Software & control unit

  • Controlled by InterSoft X software
  • Remote control
  • 15″ touchscreen
  • 8 USB ports
  • .
  • “Flash & Go” technology: compatible with our smartphone app TLC to Flash & Prep

System optimization

  • Tubes of 2.4 mm internal diameter
  • Optical path length detection cell: 0.3 mm / 80 μl

Safety

  • Level detector for solvents
  • Retention tank for solvents on the pump, dry load support (included in the Pack Process) and detectors (with leak detectors)
  • Collector with drainage system
  • “Fume Encloser” technology (allows use of the cleaning system without extractor hood).

Communication

  • Network cable RJ45
  • Communication cable Sub-D9 male/female
  • Communication cable Sub-D9 female/female
  • 8 USB ports

Dimensions

Process Flash purification puriFlash 5.007

Need more information?

Ready to configure yours?